Low at every fixture
Whole-house pressure loss may involve the pump, tank, switch settings, clogged treatment equipment, main piping, well yield, or a significant leak.
Low well water pressure
Low or surging water pressure from a well system?
Weak pressure, pressure that fades during use, surging flow, air in the lines, and frequent pump cycling can come from the pressure tank, pump, switch, controller, filter, plumbing leaks, or the well supply. The pattern of the pressure loss helps narrow the request.
Pressure pattern
Where and when the pressure drops matters.
Low at one fixture
A single weak faucet or shower is more likely to involve an aerator, cartridge, local shutoff, supply line, or branch-plumbing restriction.
Pressure fades during demand
Pressure that starts normally and falls during showers, laundry, or irrigation can point to pump output, filter restriction, well recovery, or system-sizing problems.
Tank, pump, or control?
Common sources of unstable well water pressure.
- A waterlogged or incorrectly charged pressure tank can make the pump cycle rapidly.
- A worn pump may run longer while producing less pressure or flow than before.
- A pressure switch, sensor, gauge, or constant-pressure controller may start or stop the system incorrectly.
- Clogged sediment filters or water-treatment equipment can restrict flow after the pressure tank.
- Leaks, failing check valves, low well levels, or poor well recovery can prevent pressure from holding.
Call preparation
Describe the system and the pressure change.
Include whether the property uses a jet pump, submersible pump, or constant-pressure system; whether the problem affects the house, irrigation, or both; and whether the change followed a storm, power outage, plumbing repair, filter change, or heavy water use.